Call us:+61 3 9318 9277 | Email:info@trakblaze.com

Mining, Rail, Road & Aircraft Weighing Systems

FORCE – Portable Mining Dump Truck Scales | Haul Truck Scales

FORCE – Portable Mining Dump Truck Scales | Haul Truck Scales

FORCE – Portable Mining Dump Truck | Haul Truck Scales

The FORCE In Motion and Static portable mining dump truck scales / haul truck scales offer an unbeatable weighing speed of up to 12kmh & approximate accuracy of ±0.5% in-motion and ±0.05% static *
Purchase or Rental

The Trakblaze FORCE mining dump truck scales are the ultimate in weighing technology for off-road heavy haul truck applications. Each system is designed to optimise accuracy and efficiency of use, and as our customers have experienced – built tough to last harsh working environments.

Unlike standard full deck truck weighbridges, the FORCE mining dump truck scale is made up of a combination of individual weigh pads which measure the load on each wheel and axle combination of the dump truck / haul truck. Its modular design enables it to be configured to weigh any make and model of mining dump truck / haul truck.

  • Up to 1200t gross weighing capacity
  • Individual wheel & axle weights
  • In-motion or static weighing modes
  • Multiple pad configuration
  • Manned or automatic operation
  • Basically service free
  • Australian and German design and technology
  • User friendly
  • Simple installation
  • Simple onsite test calibration and servicing

Load Sensors

Each FORCE dump truck / haul truck scale weigh pad incorporates multiple heavy duty OIML approved temperature compensated load cells. The positioning of these sensors within the pad allows for off-centre wheel loads to be measured accurately and with a safe over load sufficient to deal with the inertia and shock effects of a loaded mining truck braking on the weigh pad.

Controller

The FORCE dump truck / haul truck weighing system features a PC controller mounted in a weatherproof enclosure loaded with custom software to accurately measure the load on each wheel either statically or in-motion up to a speed of 12km/h. Total truck weight is derived from the summation of the individual wheel and axle loads.

Calibration

Each set of FORCE portable dump truck / haul truck scales are factory calibrated prior to shipment. Trakblaze also offer an in-field re-calibration service, with each weigh pad designed to accommodate a NATA traceable portable calibration press.

Accuracy

Approximate accuracies of 0.05% in static mode and 0.5% in dynamic (in-motion) mode are achievable based upon installation / vehicle conditions and the operational use of the system.
Note: Accuracies are based upon correct installation / vehicle conditions, and correct  operational use of the system and any other interfering influences that may be present.

FORCE Mining Truck Scale Matrix

Model Nominal Pad Size
L x W x H
No. of Pads Load Cell Type Loadcells per Pad Individual Pad
Capacity
Total
Capacity
FORCE 2 2000mm x 1500mm x 250mm 2 40t analogue 4 100T 200T
FORCE 4 3000mm x 2000mm x 300mm 4 100t analogue 6 150T 600T

  Custom Pads and Sizes Available

portable mining dump truck / haul truck scales

 Force 4 – 600t Mining Truck Scale

portable mining dump truck / haul truck scales

Mining truck moving over scales being weighed

portable mining dump truck / haul truck scales

Ready for Weighing

portable mining dump truck / haul truck scales

Underground dump trucks being weighed at a nickel mine in Australia.

 

portable mining dump truck / haul truck scales

Portable On Site Calibration Test Press

portable mining dump truck / haul truck scales

Software

[

This system is a “NOT LEGAL FOR TRADE USE” unit, please check with your local authorities for clarification/confirmation regarding this requirement.

Note: Specifications subject to change without notice

* Depending on site conditions and operator

View FORCE Portable Mining Truck Scales video here

Top